• NT$ 100

• NT$ 100

• NT$ 65

• NT$ 65

• NT$ 65

• NT$ 65

• NT$ 150

• NT$ 140

Pocket Hole Screws 1-1/2" Fine, Washer Head, 1000ct

​​​​​​​Designed for pocket hole systems, these screws increase the strength of a pocket hole joint. Cut-thread pattern prevents splitting.  Fine thread for the harder hard woods.
​​​​
​​​​​​​​​​​​​​

• NT$ 900

Pocket Hole Screws 1-1/2" Fine, Washer Head, 500ct

​​​​​​​Designed for pocket hole systems, these screws increase the strength of a pocket hole joint. Cut-thread pattern prevents splitting.  Fine thread for the harder hard woods.
​​​​
​​​​​​​​​​​​​​

• NT$ 520

Pocket Hole Screws 1-1/2" Coarse, Washer Head, 1000ct

Designed for pocket hole systems, these screws increase the strength of a pocket hole joint. Cut-thread pattern prevents splitting. Coarse thread is for any combination of softwoods and composites, and some hardwoods. 
​​​​​​​​​​​​​​

• NT$ 900

Pocket Hole Screws 1-1/2" Coarse, Washer Head, 500ct

Designed for pocket hole systems, these screws increase the strength of a pocket hole joint. Cut-thread pattern prevents splitting. Coarse thread is for any combination of softwoods and composites, and some hardwoods. 
​​​​​​​​​​​​​​

• NT$ 520

Pocket Hole Screws 1" Fine, Washer Head, 1000ct

The COARSE-THREAD screw has a larger thread diameter and provides greater holding power when driving a screw into soft material such as plywood, particle board, MDF, melamine, and pine.

• NT$ 820

Pocket Hole Screws 1" Fine, Washer Head, 500ct

The COARSE-THREAD screw has a larger thread diameter and provides greater holding power when driving a screw into soft material such as plywood, particle board, MDF, melamine, and pine.

• NT$ 460

Pocket Hole Screws 1" Coarse, Washer Head, 1000ct

Designed for pocket hole systems, these screws increase the strength of a pocket hole joint. Cut-thread pattern prevents splitting. Coarse thread is for any combination of softwoods and composites, and some hardwoods. 
​​​​​​​​​​​​​​

• NT$ 820

Pocket Hole Screws 1" Coarse, Washer Head, 500ct

Designed for pocket hole systems, these screws increase the strength of a pocket hole joint. Cut-thread pattern prevents splitting. Coarse thread is for any combination of softwoods and composites, and some hardwoods. 
​​​​​​​

• NT$ 460

Pocket Hole Screws 1-1/4" Fine, Washer Head, 500ct

The COARSE-THREAD screw has a larger thread diameter and provides greater holding power when driving a screw into soft material such as plywood, particle board, MDF, melamine, and pine.

• NT$ 490

Pocket Hole Screws 1-1/4" #8 Coarse, Washer Head, 1000ct

FINE-THREAD screw is used any time you’re driving the screw into a hardwood (i.e., oak, maple, walnut, cherry, hickory, etc.)

• NT$ 850